隨著科技、數字化、自動化等技術的不斷發展以及對焊接設備的高度重視，我國的自動化焊接設備與過去相比有了很大的飛躍，逐步走向科技化，因此自動化焊接設備隨著市場需求而誕生。那么山東自動焊接設備使用時的防范及措施是怎樣的呢？

With the continuous development of science and technology, digitization, automation and other technologies and the high attention paid by the country to welding equipment, China's automatic welding equipment has made a great leap compared with the past, and gradually moved towards science and technology, so automatic welding equipment was born with the market demand. So what are the precautions and measures for the use of Shandong automatic welding equipment?

1、焊接、切割作業時，清理工作環境1m范圍內的所有易燃易爆物品。注意工作環境的溝渠和下水道內是否有易燃液體和可燃氣體，是否有可燃易爆物質泄漏到溝渠和下水道中，避免焊渣和金屬火花造成災難。

1. During welding and cutting operations, clean all inflammable and explosive materials within 1m of the working environment. Pay attention to whether there are flammable liquids and gases in the ditches and sewers in the working environment, and whether there are flammable and explosive substances leaking into the ditches and sewers, so as to avoid disasters caused by welding slag and metal sparks.

2、高空焊接和切割時，禁止將電極頭四處亂扔，底部的焊割操作應隔離。作業結束后，應進行仔細細致的檢查，確認無火災隱患后方可離開現場。

2. When welding and cutting at high altitude, it is forbidden to throw the electrode head around, and the welding and cutting operation at the bottom should be isolated. After the operation, carefully and carefully check and confirm that there is no fire hazard before leaving the site.

3、應使用符合有關標準和規定的氣瓶，在氣瓶的儲存、運輸和使用過程中，應嚴格遵守操作規程。

3. Gas cylinders that comply with relevant national standards and regulations shall be used. During the storage, transportation and use of gas cylinders, safety operation procedures shall be strictly followed.

4、輸送可燃氣體和助燃氣體的管道，應當按照規定安裝、使用和管理，并對操作人員和檢查人員進行專門的技術培訓。

4. The pipelines transporting combustible gas and combustion-supporting gas shall be installed, used and managed according to regulations, and special safety technical training shall be provided for operators and inspectors.

5、在對燃料容器和管道進行焊補時，應根據實際情況確定焊補方法。實施置換法時，置換要徹底，工作中要嚴格控制可燃物的遮蔽。實施無壓法時，應按要求保持一定的電壓。工作時應嚴格控制氧氣含量。要加強檢測，注意監測，有組織措施。

5. When repairing the fuel container and pipeline, the welding method shall be determined according to the actual situation. When implementing the replacement method, the replacement should be thorough, and the shielding of combustible materials should be strictly controlled during the work. When implementing the voltage-free method, a certain voltage shall be maintained as required. Oxygen content shall be strictly controlled during operation. We should strengthen detection, pay attention to monitoring, and take safety organization measures.

自動焊接設備在各行業應用中的作用越來越大，應用范圍也在迅速擴大。由于焊接技術的特殊性和焊接設備的廣泛使用，焊接設備的發展一直受到社會各界的關注，如果您對此有需要，可以來我們網站http://www.agbet3.com進行咨詢了解！

Automatic welding equipment plays an increasingly important role in various industries, and its application scope is also expanding rapidly. Due to the particularity of welding technology and the wide use of welding equipment, the development of welding equipment has always been concerned by all sectors of society. If you need it, you can come to our website http://www.agbet3.com Consult and understand!